配合参数对单晶炉驱动系统的影响分析

光伏产业的发展使得对硅材料的需求日益增加,同时硅单晶生产行业竞争也日趋激烈。作为生产硅单晶的重要装备,单晶炉的稳定性和可靠性关系到硅单晶生产效率的提升和成本的下降,因此其驱动系统的设计和优化成为装备制造的关键环节。本文以NVT-HG2000-V1型硅单晶生长炉的驱动系统为研究对象,用SolidWorks三维建模实现虚拟装配,采用ADAMS建立其动力学仿真模型,并对驱动系统的运动过程进行仿真模拟。采用控制变量法定量分析了铜套与升降轴的配合间隙及丝杠参数对驱动力和驱动力矩的影响规律,进而在提高硅单晶生长炉装备稳定性和可靠性方面给出合理的技术建议。结果表明,铜套与升降轴的配合间隙达到0.071 mm后能有效降低驱动系统运行所需驱动力矩,丝杠倾斜度、螺纹螺距与螺纹间摩擦系数的增大均会导致驱动系统运行所需力矩大幅增加。     

Nonintrusive data-based learning of a switched control heating system using POD,DMD and ANN

The aim of this work is to derive an accurate model of two-dimensional switched control heating system from data generated by a Finite Element solver. The nonintrusive approach should be able to capture both temperature fields, dynamics and the underlying switching control rule. To achieve this goal, the algorithm proposed in this paper will make use of three main ingredients: proper orthogonal decomposition (POD), dynamic mode decomposition (DMD) and artificial neural networks (ANN). Some numerical results will be presented and compared to the high-fidelity numerical solutions to demonstrate the capability of the method to reproduce the dynamics.     

超级微波消解－石墨炉原子吸收光谱法测定香菇中的镉

为建立一种快速批量检测香菇中镉的方法,建立了超级微波消解－石墨炉原子吸收光谱法测定香菇中镉含量的方法。分别采用湿法消解、普通微波消解和超级微波、传统微波和湿法消解技术前处理香菇标准物质样品,对比消解效果,优化超级微波消解技术的酸体系和消解最终温度。;采用石墨炉原子吸收光谱仪法测定,优化基体改进剂、灰化温度等工作参数,确定仪器最佳检测条件,验证分析方法的准确性和稳定性。结果表明,超级微波消解优于湿法消解和传统微波消解技术,准确性和重复性最佳,大幅减少用酸量的同时更加安全、高效,避免样品污染。在最优分析方法条件下,镉在0~4.0 μg/L范围内所得回归方程线性关系良好,相关系数(R)为0.9994,方法检出限为0.001 mg/kg,精密度RSD为1.4%~2.5%。超级微波消解－石墨炉原子吸收光谱法检测的探索与应用超级微波消解优于湿法消解和传统微波消解技术,大幅减少用酸量的同时更加安全、高效,避免样品污染,为农产品镉含量批量检测提供可靠的方法支撑。     

臭氧氧化结合湿法喷淋对玻璃窑炉烟气同时脱硫脱硝实验研究

采用臭氧氧化结合湿法喷淋对模拟玻璃窑炉烟气开展了同时脱硫脱硝实验研究.采用不同溶液(NaOH、Na₂S)进行了喷淋实验.结果表明,保证溶液pH值在10以上,NaOH浓度对NO_x脱除效率无影响,SO₂的存在促进了NO_x吸收.当O₃/NO物质的量比为1.6、溶液NaOH浓度为0.5%时,NO_x脱除效率可达70%,SO₂脱除效率在99%以上.往喷淋液中添加Na₂S,NO_x脱除效率随Na₂S浓度增加而提高,SO₂的存在对NO_x脱除效率无影响.当O₃/NO物质的量比为1.2、溶液中NaOH浓度为0.5%、添加剂Na₂S浓度为0.6%时,NO_x脱除效率可达70%,SO₂脱除效率在95%以上.60 min长时间运行实验证明,模拟烟气中的NO_x经碱液和添加剂吸收后主要以NO^-₂的形式存在于喷淋液中,且NO_x脱除效率不随溶液pH值的变化而变化.     

Tracing novel hemostatic compounds from heating products of total flavonoids in Flos Sophorae by spectrum–effect relationships and column chromatography

Flos Sophorae and its processed product have been clinically used to treat hemorrhage. In this study, the total ion chromatographic fingerprints of the heating products of total flavonoids in Flos Sophorae were established by high‐performance liquid chromatography with tandem mass spectrometry and the hemostatic activities were studied by hemostatic screening tests in vivo. The spectrum–effect relationships between fingerprints and hemostatic activities were investigated using canonical correlation analysis to trace the peaks responsible for the hemostatic effects. The predicted active peaks in fingerprints were isolated by column chromatography and their structures were identified by NMR spectroscopy and mass spectrometry. The hemostatic activities of them were verified by platelet aggregation and procoagulation assays in vitro. Canonical correlation analysis results showed that peak 8 and peak 11 were correlated most closely, thus probably being the main hemostatic compounds. Through column chromatography separation, peak 8 (compound I) and peak 11 (compound II) were obtained with purities of 95.61 and 93.38%, respectively, and were discovered new hemostatic compounds named as huaicarbon A (I) and huaicarbon B (II), respectively. This study provides a universal model to trace the active compounds of other herbs which have bioactivity enhancement after processing by spectrum–effect relationships and column chromatography.     

微波消解-石墨炉原子吸收光谱法分析测定食用菌中总砷

摘 要：采用微波消解-石墨炉原子吸收光谱法分析测定食用菌中总砷。取可食部分的食用菌粉碎均匀,采用微波消解对样品进行消解,将消解液于140℃赶酸至0.5mL ,用超纯水转移定容至25mL。以0.1%的硝酸钯为基体改进剂,塞曼扣背景,用石墨炉原子吸收光谱法测定总砷。方法检出限为0.4μg/L,线性范围为0~30 μg/L,线性相关系数(r)大于0.998,采用精密度考察方法重现性,不同浓度水平的RSD%均小于6.6%;三个浓度水平的加标回收率为80.6% ~ 103.9%,有证标准物质测定结果符合要求。实验结果表明,方法操作简便、灵敏、准确,适合食用菌中总砷的测定。对砷形态复杂的野生食用菌,微波消解后可直接采用石墨炉原子吸收光谱法测定总砷。     

微波消解–石墨炉原子吸收光谱法测定空气中碲

建立微波消解–石墨炉原子吸收光谱法测定空气中的碲。采用微孔滤膜收集样品,以硝酸–双氧水混合体系微波消解滤膜,氯化钯为基体改进剂,在优化的仪器工作条件下测定。碲的质量浓度在0~15μg/L范围内与吸光度线性关系良好,相关系数为0.999 5,方法检出限为0.14μg/L。样品加标回收率在95.6%~104.0%之间,测定结果的相对标准偏差为1.15~1.37%(n=7)。该方法操作简单、灵敏度高,适用于空气中微量碲的测定。     

高频感应炉燃烧–红外吸收法测定银杏及银杏叶中的硫含量

采用高频感应炉燃烧–红外吸收法测定银杏叶、银杏果肉、银杏壳和银杏仁中的硫含量。样品以艾士卡试剂为熔融剂,在800℃马弗炉内熔融1 h,冷却后测定硫含量。硫的质量分数在0.40%~4.00%范围内与吸收峰面积呈良好的线性关系,线性相关系数为0.990 4,检出限为0.000 9%。测定结果的相对标准偏差为4.04%(n=11),平均加标回收率为101.03%。将红外吸收法与电感耦合等离子体原子发射光谱法及硫酸钡重量法进行比对试验,3种方法测定结果相一致。利用该方法测定了不同区域银杏叶中硫的含量,结果表明,风景区和居民区银杏叶干燥基全硫的含量较低,重工业区硫含量较高。对同一地区的银杏果肉、银杏壳、银杏仁中干燥基全硫的含量进行比较,结果表明银杏果肉硫含量最高,银杏壳次之,银杏仁最低。该方法灵敏度高,重现性好,可用于银杏及银杏叶中硫含量的准确测定。     

自动快速燃烧－离子色谱测定铜精矿中的氟

建立了自动快速燃烧（AQF）－离子色谱联用测定铜精矿中氟的方法。将 AQF 的自动化特性和离子色谱的灵敏度高、准确性好的特点结合起来,能够实现操作过程的连续自动化。结果表明,线性范围内（1.0?50.0 μg )校准曲线相关系数 r >0. 999,氟的检出限为0.0004%。按照实验方法测定铜精矿样品中氟,结果的相对标准偏差（ RSD ,n =6)为2.14 % ?4.24 %。将实验方法用于铜精矿标准样品氟含量测定,测定值与认定值吻合较好;方法对照试验表明,实验方法对氟含量的测定值与国家标准 GB/T 3884. 12—2010的测定值基本一致。     

高炉在工作中的应力检测技术

本文针对电测法对高炉炉壳进行应力应变现场实测中的许多技术问题。进行了电测技术的若干技术问题的研究。解决了测试中由于停封取芯而导致的电测导线断开，而确保测试的连续性问题，采取了有效的防潮措施；选用了合适的应变计和粘结剂问题，通过模拟实验及现场实测证明了所采取的技术措施是有效的，使电测法在高炉炉壳检测中的应用得到进一步的完善。